|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/TRI/SGT364350/A/21/03/2000 page 1 / 2 F/GB Relais Statique Triphase Three Phase Solid State Relays * Sortie AC asynchrone ( principalement pour moteurs) * Commande 5-30 Vdc avec LED * Protection interne par RC et ecreteur de tension . * Possibilite de protection IP10 en option:Capot 1K199 000. * Random AC output. ( mainly for motors) * 5-30 VDC control voltage. with LED * Internal protection by RC and clamping voltage. * Protection IP10 optional (1K199 000). Dimensions / Dimensions: Application typique /Typical application: R S T R S T R S T SGT364350A 24 to 520 VAC - 12 ARMS Circuit equivalent/Equivalent circuit : 1L1 39,5 A1+ Adaptateur / Adapter 2T1 82,7 19 19 Resistive or inductive load 3L2 LED Adaptateur / Adapter 4T2 5L3 M 4,4 A2 - 1L1 3L2 5L3 58,4 73,5 23 40 A2- Adaptateur / Adapter 6T3 A1+ 2T1 4T2 6T3 91 100 fig. 1 :Caracteristique d'entree / Control characteristic 120 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage Symbol Uc Ic Uc off Rc Urv Min 5 11 2 DC Nom 24 80 270 30 Max 30 100 Unit V mA V V VRMS VRMS V 100 80 Ic(mA) 60 40 20 0 0 5 10 15 20 25 30 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignee isolement/ Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Uc (V) Conditions Symbol Typ. 370 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SGT364350/A/21/03/2000 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity Caracteristiques thermiques / thermal curves : 60 page 2 / 2 F/GB Conditions Symbol Typ. Unit Ue 400 V rms Uemin-max 24-520 V rms Up 1200 V Usync random V Ua 10 V Ie AC-51 12 A rms Ie AC-53 2,5 A rms Itsm 120 A Vd 1,3 V Ilk <3 mA Ie min 5 mA ton max 0,1 ms toff max 10 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 72 A2s 2kV criterion A 2kV crit.A Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x 0,95K/W 50 1,2K/W Total wasted power (W) 40 Full on-state 30 3K/W 20 without heatsink 10 0 0 2 4 6 8 10 12 0 10 RMS load current (A) 20 30 40 50 60 70 80 Ambient temperature (C) 90 100 Fig.3 Courbes de surcharge de courant / Overload current curves 150 Itsm (Apeak) 100 50 0 Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70C Surge current Itsm (Apeak) = f(t) for models with itsm =120A 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . No repetitive Itsm (Apeak)=f(t) without voltage reapplied 0,01 0,1 t(s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SGT364350A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |